Welcome to CleaningRus
One stop for all your Chemical Supplies
Australia Wide Shipping
Welcome to CleaningRus
One stop for all your Chemical Supplies
Australia Wide Shipping
Welcome to CleaningRus
One stop for all your Chemical Supplies
Australia Wide Shipping
Welcome to CleaningRus
One stop for all your Chemical Supplies
Australia Wide Shipping
Proudly Australian
P: 07 3054 1445
E: admin@cleaningrus.com.au
Concentrate: cleaner for acid resistant natural stones.
Cleans granite, gneiss, quartzite and other natural and engineered stones. Removes cement films, stubborn dirt residues, blooms, efflorescence, rust and rust discolorations. Also acts to prevent rust in hard stones containing iron. Not suitable for polished marble, limestone etc.
Product type: acidic cleaner
concentrate - high yield
highly effective
prevents rust
A special product from the LITHOFIN-Range for natural and manufactured stone (MN). This highly active cleaner contains the optimal combinations of different kinds of acid, rust preventing and cleaning agents.
Lithofin MN Builders' Clean dissolves and removes cement and mortar residues, efflorescences, limescale deposits, stubborn ingrained dirt, rust and rust discolourations. The yellowish discolouration which results from iron containing stones rusting is removed and largely prevented.
Density: approx. 1,2 g/cm³
pH-Value: < 1 (concentrate)
Appearance: liquid, reddish
Odour: pleasant, fresh
Flash Point: n.a.
Solubility in Water: complete
For removing cement residues from newly installed surfaces, for thoroughly cleaning used surfaces and for removing rust and rust discolourations. Lithofin MN Builders' Clean prevents rust discolourations, which occasionally appear when cleaning iron containing stones such as serrizzo, cresciano, calanca, sardo white, etc. The product is therefore particularly suitable for those stones.
Surfaces: suitable for all acid resistant natural stones such as granite, gneiss and quarzite.
Please Note: not suitable for polished and finely honed limestones (marble) and manufactured stones. Always try the product in an inconspicuous area prior to use, since especially blue and black “granites” are often damaged.
First wet the surface, then apply Lithofin MN Builder’s Clean – diluted with water up to 1:10, depending on the type of dirt – and immediately spread the product evenly on the surface with a scrubbing brush. After a few minutes, scrub the surface then wash away with clean water. Do not allow the product to dry on the surface. In stubborn cases this procedure may have to be repeated.
Please Note: Lithofin MN Builder’s Clean is not suitable for polished or finely honed surfaces which are sensitive to acid such as limestone, marble, manufactured stone, etc. In cases of doubt, try the product in an inconspicuous area. Surfaces such as chrome, enamel, wood, and similar acid sensitive surface must be protected against splashes and vapours. Acid containing cleaners can develop vapours which may damage sensitive surfaces. We highly recommend carefully washing the product off the surface and ensuring good ventilation during and after use.
Up to 30m² depending on dirt.
Many natural s tones require a protective treatment which prevents the penetration of water, oil and dirt. The LITHOFIN-Range offers suitable special products.
Closed, cool and dry. Shelf life of up to 5 years.
Surfactants are biologically degradable in accordance with EU-regulations. Free of phosphates. The acidic components are largely neutralised during cleaning.
Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.
Ingredients: hydrochloric acid (<10%); but-2-yne-1,4-diol (<10%); orthophosphoric acid (10% to 30%); auxiliary agents. Labeling according to VO(EG) Nr.1272/2008(CLP): Symbol GHS 05, Danger Contains phosphoric acid. May be corrosive to metals. Causes severe skin burns and eye damage. Contains But-2- in-1,4-diol. May produce an allergic reaction. Keep out of reach of children. Keep only in original container. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Store locked up.
Most of our seller provide standard 30-day return policy, which means you have 30 days after receiving your item to request a return. Please note, seller may decide to change or update policy depends on the type of products anytime without prior noticed. If you have any question, please contact admin@cleaningrus.com.au with product details and we will confirm return policy with the our supplier.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at admin@cleaningrus.com.au. If your return is accepted, you will need to pay for the return postage. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at admin@clenaingrus.com.au
Damages and issues: Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items: Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges: The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds: We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
We can ship to virtually any address in Australia. Note that there are restrictions on some products, and if some chemical products cannot be shipped, our seller will reach out to you and discuss further and organise a refund if required.
When you place an order, we will estimate shipping rate and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider and type of product, shipping rate and date estimates may appear on the shipping quotes page. If any changes to actual rate, our seller will reach out before order fullfilled.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full kilo.
Thanks for subscribing!
This email has been registered!