Lithofin MN Easy-Care

Care for all natural and concrete stone

Developed for continuous care of all types of stone surfaces. Cleans, enhances and maintains the surface in one action. Coarse and polished surfaces become increasingly beautiful and richer in colour and structure with regular use. Ideal for imoregnated or sealed surfaces.

Product type: mildly alkaline maintenance product

concentrate - high yield

does not form layers

non leaching

 Description

A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Easy-Care is a high-yielding cleaning and maintenance concentrate, which contains active maintenance components and mildly alkaline cleaning agents based on natural soaps.

Properties

Highly effective agents take up the dirt and so it can easily be removed by wiping. The remaining extremely thin care film is free of wax and does not build any layers. With continued use, the surface’s appearance will improve in colour and structure. Lithofin MN Easy-Care leaves a pleasant odour.

Technical Data:

Density: 1.0 g/cm³

pH-Value: approx. 10 (concentrate)

Appearance: viscous, yellowish

Odour: pleasant

Solubility in Water: complete

Field of Use

For regular maintenance cleaning of all marble and natural stone surfaces.

Surfaces: all natural stones such as carrara, travertine, jura marble, porphyr, serizzo, sandstone as well as engineered stone. The surfaces can be polished, honed or rough, impregnated sealed or untreated.

Directions for Use

Lithofin MN Easy-Care is always added to lukewarm water. One squirt (approx. 20ml) per 10 litres of water. In case of absorbent, dirty surfaces use a bit more. After wiping, allow the residues to dry on the surface, do not rinse with clear water. Use either a floor mop, cloth or cleaning machine for wiping.

Coverage: Lithofin MN Easy-Care is a high-yielding concentrate and very economical. On large areas which are machine cleaned daily approx. 3 litres per 100m² will be needed per month.

Advice: in areas subject to heavy wear and tear and on very dirty surfaces, it may be necessary to occasionally use Lithofin MN Power-Clean.

Further Maintenance

Natural stone floors should be wiped regularly. Especially on polished marble, we recommend using Lithofin MN Easy-Care three to four times, then using Lithofin MN Care-Sheen once.

Storage

Keep closed and cool. Not above 25°C. Shelf life of up to 5 years.

Environmental Protection

The contained surfactants are biologically degradable according to EU-regulations. Does not contain any phosphates.

Disposal: diluted product may be added to waste water. Containers are made of environmentally friendly polyetylene (PE). Clean containers can be recycled through collection system.

Safety

No health concerns once dry. Ingredients: 5-15 % anionic surfactants, < 5% nonionic surfactants, < 5% natural soaps, scent (limonene, geraniol), auxilliary agents. Labeling according to VO(EG) Nr.1272/2008(CLP): Symbol GHS 07 Warning Contains benzenesulfonic acid. Concentrated product causes serious eye damage. Keep out of reach of children. Wear protective gloves/eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician.