Lithofin MN Power-Clean

Concentrate: basic cleaner for all natural stones

For thorough cleaning in case of severe general and greasy dirt, residues of floor care products, etc. For regular cleaning of high-traffic and outdoor areas such as shopping centres and food courts. For final cleaning of new surfaces at building sites.

Product type: alkaline cleaner

concentrate - high yield

highly effective

low on odour

Description

A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Power-Clean is free of solvents, low in odour and economical in use. It is a mildly alkaline cleaner, which contains a balanced mixture of cleaning components which guarantee optimal performance.

Properties

This special cleaner is nearly odourless and highly economic. Lithofin MN Power-Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, care products, etc.

Technical Data:

Density: approx. 1.0 g/cm³

pH-Value: approx. 10

Appearance: liquid, colourless, clear

Odour: pleasant

Flash Point: n.a.

Solubility in Water: complete

Field of Use

For thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly laid surfaces. Suitable for use on polished, finely honed and rough marble and other natural stones. Facilitates removing cement residues from polished marble. Suitable for indoor and outdoor use.

Directions for Use

Apply and evenly distribute Lithofin MN Power-Clean diluted up to 1:10 and wipe the surface. In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry, add water if  necessary. Brush again before wiping up. On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean water. If the result is not satisfying, repeat the process allowing the product to work longer and brushing more vigorously.

Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wall paper, etc. Always test the product in an inconspicuous area prior to use.

Coverage: approx. 10-30 m² per litre.

Advice: for removing wax layers and the like, we recommend Lithofin WAX-OFF. For cement residues and rust discolorations on granite, gneiss and similar acid resistant stones, use Lithofin MN Builders’ Clean.

Storage

Keep closed, cool and dry. Not above 25°C. Shelf life of up to 3 years.

Environmental Protection

The contained surfactants are biodegradable according to regulation (EC) No. 648/2004 (detergentsregulation).  Disposal: waste code according to EWC/AVV 07 06 08*. Bottles/canisters are mode of environmentally friendly polyethylene and can be recycled (see information on label).

Safety

UFI: 6RE0-506M-7004-PH2U Ingredients according regulation (EC) No. 648/2004 (detergents  regulation): < 5 % non-ionic and < 5% cationic surfactants, scent, geraniol, sodium pyrithione, benzisothiazolinone. Labelling according to EU-Directive 1272/2008(CLP): Symbol GHS 05, danger Propylheptanolethoxilate, quaternary C12-14 alkylmethylaminethoxylatmethylchloride May be corrosive to metals. Concentrate causes serious eye damage. Keep out of reach of children. Keep only in original container. Wear eye/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.